This modified version of the P1P Machine End G-Code is designed to prevent the AMS from retracting the filament post-printing. I find this tweak extremely useful as it saves time at the beginning and end of numerous printing jobs, provided the subsequent job uses the same filament type. The sole drawback is when using moisture-sensitive filaments, as they remain partially exposed outside the AMS, making them vulnerable to ambient humidity. Note that if a print job starts with an incorrect filament, the printer will automatically unload it and load the correct one at the beginning of the process.

However, caution is advised with new firmware updates, as they may impact the functionality of this modification.

Installation

1. Download the ZIP file and extract the .txt file.
2. Open Bambu Studio, navigate to printer settings, and select the machine G-Code tab.
3. Replace the existing machine end G-Code with the contents of the downloaded .txt file.
4. Save these settings under a new profile name.
5. Choose this newly created profile whenever you wish to apply this modification.

Disclaimer

This modification is to be used at your own risk. Any damage to your printer or AMS as a result of this modification is solely your responsibility.