Hi Everyone,

i present you this fun model to print, build and glue.

The assembly is easy, you can find the disassembled model in the images.

I used this led strip: https://it.aliexpress.com/item/1005002425437246.html?spm=a2g0o.detail.0.0.abe16I8Q6I8QPG&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40000.327270.0&scm_id=1007.40000.327270.0&scm-url=1007.40000.327270.0&pvid=b790aa91-ff18-4a1d-b0e8-e8e8908f9caf&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40000.327270.0,pvid:b790aa91-ff18-4a1d-b0e8-e8e8908f9caf,tpp_buckets:668%232846%238108%231977&pdp_npi=4%40dis%21EUR%216.15%211.46%21%21%216.48%21%21%40211b600b17020826571622891e1a0f%2112000035297857820%21rec%21IT%21%21AB

And attaching it inside the engine compartment:

The LED strip comes without USB connection. I took an old cable of 3.3mm diameter, that I cut and connected to the strip. Remember to solder it with an angle of 90° to make it align better with the hole in the fuselage:

To prevent the cable from tearing I recommend you to use hot glue over the soldering and wrap with heat shrink:

Among the STL files you will also find the fuselage without the bambulab writing.

Enjoy! And feel free to follow me if you like my works!