Grunge Grinch Girl
Print Time 5hrs 35 min
P1P/ Bambu Basic PLA in CMYK Colours
I use Other filament but Bambu Basic PLA Profile
(I turn off Aux fan but the file profile has it on at 20%)
Settings are taken from https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions%20
Lithophane created with https://lithophanemaker.com/Color%20Lithophane.html?fbclid=IwAR0zbiYVOGT2kV0MY4LtLbNk5rrg_wOd_bEsA2kpnxebZCTbBNzPyFu8h7g.#processing
First Layer .1mm
Other layers .15mm
Classic walls
2 wall loops
3 top shell
3 bottom shell
100% rectilinear
Speed: Slow Down For Overhangs Turned off
Prime tower enabled
Brim/Bed Adhesioin: None Needed
Flushing turned off