Toniebox Shelf Honeycomb / Tonie Box Regal
Print Profile(8)
Description
This is my modular shelf for Toniebox figures.
Children can use it to ideally sort and store their Tonie figures. Since it is a modular system, it can be expanded as needed if more figures are added. The height of a single compartment is X mm, allowing even the larger figures to fit. If any figures are too large, they can be placed on top of a compartment.
Version 1:
- Consistent honeycomb structure for the base and back wall
- Thanks to the 10x10mm honeycomb pattern, an M6 nut can be pressed into any spot, allowing the Tonie figure to attach magnetically
Version 2:
- No honeycomb structure in the base, the base is solid and a M6 nut can be inserted here for magnetic coupling of the Tonie figure
Version 3:
- Also no honeycomb structure in the base, the base is solid and a 6mm magnet is pressed into the base from below.
- These magnets can be purchased affordably via this link on Amazon: https://amzn.to/3VrLkMw
Version 4:
- The base is solid and a 6mm magnet is pressed into the base from below.
- These magnets can be purchased affordably via this link on Amazon: https://amzn.to/3VrLkMw
- No wall
Version 5:
- Consistent honeycomb structure for the base
- No wall
Clips:
Clips are needed to connect the compartments. Simply print the required number based on your needs.
Hanging Hook:
Print this hook and insert it into the holder to hang the shelf.
Boost Me (for free)
My work is 100% free for you, so I would appreciate a boost as support! Thanks :)
This is my modular shelf for Toniebox figures.
Children can use it to ideally sort and store their Tonie figures. Since it is a modular system, it can be expanded as needed if more figures are added. The height of a single compartment is X mm, allowing even the larger figures to fit. If any figures are too large, they can be placed on top of a compartment.
Version 1:
- Consistent honeycomb structure for the base and back wall
- Thanks to the 10x10mm honeycomb pattern, an M6 nut can be pressed into any spot, allowing the Tonie to attach magnetically
Version 2:
- Consistent honeycomb structure, but in this version, the base is fully printed and closed
- An M6 nut can also be used here for magnetic coupling of the Tonie figure
Version 3:
- Consistent honeycomb structure, but in this version, the base is fully printed and closed
- A 6mm magnet is pressed into the base from below on the underside
- These magnets can be purchased affordably via this link on Amazon: https://amzn.to/3VrLkMw
Version 4:
- Consistent honeycomb structure, but in this version, the base is fully printed and closed
- A 6mm magnet is pressed into the base from below on the underside
- These magnets can be purchased affordably via this link on Amazon: https://amzn.to/3VrLkMw
- This version has no back wall
Version 5:
- Consistent honeycomb structure
- This version has no back wall
Same as Version 1, but no back wall.
Clips:
The clips are needed to connect the compartments. Simply print the desired number as needed.
Hanging Hook:
Simply print this hook and insert it into the holder, then the shelf can be hung up
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (226)