Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Protopasta Silver Smoke Grey Transmission Distance: 20
PLA Protopasta Partly Sunny Yellow Transmission Distance: 12
PLA PolyTerra Cotton White Transmission Distance: 2.5

Swap Instructions:
Start with Charcoal Black
At layer #8 (0.72mm) swap to Silver Smoke Grey
At layer #12 (1.04mm) swap to Partly Sunny Yellow
At layer #17 (1.44mm) swap to Cotton White for the rest.