Great in function.  But minus 1 star because the lid just keeps coming off. i sued some aluminum tape to hold in place. At times when i bumped the lid taking the cover off the drier it woitake the lid off. 

3DPRNT4LF

See print profile settings

RonvanP

cover

PXL_20231206_141211342.MP_4306d6f3-6ba3-455c-b665-08593743a9da.jpg

Eibos dessicant tray assembly_481bdce9-3590-47fa-be78-32c8d4f48e61.png

Eibos dessicant tray lid_b304da25-2f70-4289-aa62-502e39d2006c.png

Eibos dessicant tray_1bca1a37-5217-433a-8f28-1461826e0c2c.png

PXL_20231206_144313143_45ac330e-2094-4729-8128-4749b329753a.webp

PXL_20231206_141222928_d687846a-b584-4b81-9bb6-5cf4972906db.webp

plate_1.png

no support needed, Set to print with at least 2 walls, sparse infill at 0%, top shell layers at 0, no brim, outer wall at 0.58, inner wall at 0.55mm, do not print this using PLA or other low temp material, use ASA, ABS or other high temp material..&nbsp;

this tray has a snap-on lid. I first made 1 for vase mode, but due to the long shape, I found it to flimsy and was worried the lid would snap loose. This one is designed to be printed with ASA or similar higher temp material. No supports or brim is needed, I recommend to slice (based on 0.4mm nozzle) with wall loops at 3 (, use outer wall at 0.58 and inner at 0.5, infill at 0%.

Eibos cyclopes dessicant tray with lid

Global

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models

Modern Key Tray

Inside Spool Silica Gel Container (small beads)

Large Desiccant Box with Spout Lid and Plug

Clamp on Pool Tray