AMS Lite Low Vertical Stand - Single piece print for A1 Mini Remixed by DeMeshe Node

Remixed by

DeMeshe Node

3D Printer>3D Printer Parts

Print Profile(6)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.4mm nozzle, 0.2mm layer, 2 walls, 12% infill - prints as a single piece

Designer

3.4 h

1 plate

4.9(96)

corrected to 0.4 nozzle 0.2mm layer, 2 walls, 12% infill

5.2 h

1 plate

4.8(77)

bicolored, 0.2mm layer, 2 walls, 12% infill

4.5 h

1 plate

4.6(10)

0.6mm nozzle, 0.3mm layer, 2 walls, 12% infill

3.8 h

1 plate

4.9(7)

Click to see more

Boost

327

622

262

1.6 k

807

Released

Description

Fits in one piece on the A1 Mini print bed. There's a slight step in the model where I cut'n'shut the model, too lazy to fix it as it doesn't look terrible. Recomended to add a modifier (as shown in pictures) to add 100% infill to the bottom half of the central leg where it joins the base.

a1 mini

ams lite

Comment & Rating (262)

@SeppDruck

Print Profile

corrected to 0.4 nozzle 0.2mm layer, 2 walls, 12% infill

Perfekter Ständer :D gute Qualität und stabil, so muss es sein :)

(Edited)

@DeMeshe_Node

It's great that you like your print of googly eyes, not sure it's the AMS Lite single print stand though! Keep enjoying your printing!

(Edited)

@SeppDruck

Replying to @DeMeshe_Node :

Sorry, I'll correct that

(Edited)

@DeMeshe_Node

Replying to @SeppDruck :

Erstaunlich, schön zu sehen, dass es bei Ihnen gut funktioniert, und vielen Dank für das Hochladen eines coolen Fotos!

(Edited)

@ceo51378

Print Profile

0.4mm nozzle, 0.2mm layer, 2 walls, 12% infill - prints as a single piece

printed perfectly in PETG. great fit, no issues. I added rubber feet to it to keep it from sliding on my desk.

The designer has replied

@DeMeshe_Node

brilliant! nice print! great idea for the feet!

@ceo51378

Replying to @DeMeshe_Node :

Thanks. I was actually going to suggest adding standoffs for optional rubber feet. Something like this:

(Edited)

@user_1554414235

perfect, i used PETG

The designer has replied

@DeMeshe_Node

brilliant, thanks for sharing you photo!

@piranha

Boosted

Print Profile

0.4mm nozzle, 0.2mm layer, 2 walls, 12% infill - prints as a single piece

awesome print, it should be originally like that

The designer has replied

@DeMeshe_Node

Splendid! Glad you like it!

@Reeperru

Love the design. AMS lite takes up allot less space than original stand

The designer has replied

@DeMeshe_Node

awesome, thank you for the great photo!!

@profly

Works perfectly! Fits my 500mm height cabinet with a little space. Flipped the AMS so that i could still have spools 1 and 2 on the left, and still access the filament input funnel. Cheers!

The designer has replied

@DeMeshe_Node

fantastic! I also have the AMS flipped so I have more options on where I can position the ams relative to the printer. thanks for the neat photo!!

@ometzger

Super, danke👍

The designer has replied

@DeMeshe_Node

Gern geschehen, vielen Dank für das Foto

@TuffCookie

Print Profile

0.4mm nozzle, 0.2mm layer, 2 walls, 12% infill - prints as a single piece

Works Perfectly , lifts the bottom reels enough to keep them free from hitting the deck , sturdy design and pretty fool proof. fits exactly where i need and neatens up my work space no end. printed it on my a1 mini time was a good 4 hrs but well worth it filled the bed space but did overload the machine at any point. printed in grey sunlu as its a near match to the grey on the machine.