RGB DOUBLE HELIX LAMP - easyprint - no AMS needed by HEDO 3D

HEDO 3D

Hobby & DIY>Electronics

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 1 walls, 0% infill

26 min

1 plate

4.8(5)

fixed level with bed now

6 h

3 plates

5.0(3)

0.2mm layer, 2 walls, 15% infill

5.6 h

2 plates

4.0(4)

Open in Bambu Studio

Boost

108

158

161

Released

Description

3D printed double helix lamp

(the base was designed to color change by layer change - no multimaterial option needed)
printing hints:
all 3d parts can print without support, only add brim to some parts (diffusers and helix, but I printed diffusers without brim),
I printed this diffusers with glow in the dark PLA in vase mode very slowly (16 minutes per part or slower and print environment temperature around 25 degree celsius),
print height for helix needed is 200 mm (print time 5 hours per part),

electronic parts :
arduino nano or ESP8266 or similar (you can use WLED software)
WS2812B strip 2x 14 LED's (60 leds per meter) 10 mm width!
micro switch (6x6x10)
power outlet and power supply (or use usb power)

In my video I have used some examples from the fastled library to show you some possible effects and how beautiful a rainbow can look. ;)
I am very curious about the programs and functions that you implement. Would be great if one or the other would share their example code. If you want, use an ESP8266 and the freely available WLED software. You can also control the Helix via WiFi.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

Supports:

Resolution:

0.2 - 0.3

How I Designed This

Category: Electronics

Comment & Rating (19)

@kimtez1

Very fun build.

@sivert.lokkesve

Cool build. Having a little issue with printing the base, casuse of the design portion is floating and not possible to get a support under it. Is there possible to get the step files for this to make some minor adjustments?

The designer has replied

@HEDO3D

in slicer you can separate to objects and delete the inbuild support

@radish5

Replying to @HEDO3D :

The model would be easier to print if the helix inlaid in the base was flush with the build plate. I think that's what @sivert.lokkesve was asking about. Separating into parts does not help with that. Could you upload a version of the base with a flush inset please?

@radish5

Slice 0.25 mm off the bottom of the base. Doing so made the design portion flush with the build plate.

(Edited)

@crmeier9

Print Profile

0.2mm layer, 1 walls, 0% infill

This print can be printed with Bambu labs transparent filament. It is a little tougher but it looks super cool!!

@crmeier9

Print Profile

fixed level with bed now

This print turned out super awesome!!!

@Fatalchaos25

Print Profile

0.2mm layer, 2 walls, 15% infill

printed great

@Fatalchaos25

Print Profile

0.2mm layer, 1 walls, 0% infill

printed great

@blownfg

Print Profile

0.2mm layer, 1 walls, 0% infill

thanks

@blownfg

Print Profile

0.2mm layer, 2 walls, 15% infill

great

@lausi2002

Nice model, in general I like it. But the base has some difficulties. @HEDO3D Would it be possible that you upload the STEP file for the base as well so that I can build a remix with a bit changed base? That would be very nice, thank you.