Parametric Flange/Wall Sleeve Generator AC Pipes

For threaded pipe caps and plugs click HERE. For full cover caps and plugs generator click HERE.

This flexible and highly customizable flange generator is designed to meet a wide variety of use cases, from cable management to pipe installations. Whether you're working on a home improvement project or an industrial setup, this generator provides all the tools you need to design the perfect flange for your application.  

sleeve_shape - The shape of the outer sleeve, which is the flat part.

hole_diameter - Diameter of the hole you want “dressed.”

wall_thickness - Wall thickness of the part that goes into the hole.

insert_length - How far the part extends into the hole.

sleeve_width - The outer size of the flat part; diameter if round or side length if square.

sleeve_base_thickness - Thickness of the flat part. Samples were created with 0.4 mm thickness as it is intended for plastering over the flange.

mounting_holes - Do you need mounting holes?

mounting_holes_diameter - Diameter of the mounting holes.

connection - Do you want to connect two, inserted from both sides, flanges/sleeves in the hole. This option will create the “male” part and you will also need to Generate and download the “female” part. Here is an example:
 

You can mix and match different types depending on needs.

connection_length - Length of the overlaping part

connection_offset - Difference between the internal diameter of the female part and external diameter of the male part. You might need a bit bigger offset if the connection is deep inside. 

cut_model - Click this option if you already have stuff in the holes and wat the model to be cut on one of the sides.

cut_width - How wide do you want the cut to be? Default is 0.5 mm. 

Don't see an option? Let me know.