200/250G Spool Shelves (Fits A1 Mini Spools)

Join Patreon as a free member to catch new releases & free-to-sell models.

Prowl with 1k+ foxes & 200+ authorized sellers in our Skulk!! 🦊

Friendly Reminder: An active commercial license is required to sell prints of my non free-to-sell models.
>> (My partner and I offer many models you can sell for free!) <<

I'm an ADHD husband, father of 5, QA engineer, market vendor, & self-taught designer.

Thank you for backing my family of 7 & honoring the thousands of hours I've poured into this! 🖤

---

(Love honeycomb & have a lot of keyboards? Check out my honeycomb keyboard wall mount.)


[Check out the 1KG remix as well!]

[This shelf perfectly fits Henlor's Bambu Lab A1 Mini Spools.]

I wanted a spool holder that works with my 200/250g spools.

I added ends to the Honeycomb spool shelf & decreased its size by ~15%, to fit 3/4" or 20mm dowels.
 

The size of all holes have been maintained, from the original. this way the same supplies may be used.
You'll notice that the screw holes are misalligned. This is intentional. It reduces the chance of splitting the dowel when adding screws & allows you to screw further in from the end.

You are able to print these on an A1 Mini! You will only be able to print 1 at a time. On an A1, you are able to print both ends on the same plate (by object).

I cut 3/4" diameter x 36" length oak dowels in half to 18" (it was all I had room for), used #8 (5/32") screws + nylon anchors for mounting, & drilled in 1-1/4" fine screws to attach the dowel.

With these ends, you can go without screws in the end holes of the mount. It makes it easier to not warp, misalign, or possibly split the end dowel - but may decrease structural integrity.

(I printed 2 ends with tree supports & 2 without. I experienced NO noticeable difference in results.)

---
If you like & want to support my work, you can always..

• ⚠️ May have sharp or pointed features that could cause discomfort or injury if handled carelessly
• 🧩 May contain small parts and present a choking hazard
• 👶 Not for children under 3 years of age
• 🧠 Recommended for mature users
• 🤕 ToddysTrinkets is not responsible for injuries resulting from use
• 🛑 Use at your own risk