AMS Lite Wall Mount Adapter by Wolf3DP

Wolf3DP

3D Printer>3D Printer Accessories

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 15% infill

Designer

2.3 h

1 plate

4.7(146)

IMPROVED Model - Increased Clearance - Sturdier

Designer

3.1 h

1 plate

5.0(7)

Open in Bambu Studio

Boost

229

431

208

1.2 k

784

Released

Description

This is a simple bracket to mount your AMS Lite on the wall to free up some desk space. I recommend using #12 drywall anchors if you're not mounting on a stud. You can use the same screws that the stock stand mounts with to attach the AMS. Mount the adapter to the wall first and then attach the AMS! I printed in PLA and it's fine so far, but given the potential weight on the system, I'd recommend printing this in PETG! Both parts can be printed at the same time on the A1 Mini :)

Comment & Rating (208)

@lucas.m.johnson

Print Profile

0.2mm layer, 3 walls, 15% infill

I really like this mount. it’s a great space saving solution. Very flush and simple. printed in Bambu PLA Tough and 25% infill for getter strength.

The designer has replied

@Wolf3DP

Thanks! I'm glad it's working out for you!

@kukiesnmiuk

That setup looks amazing!

@Rivi_Twintania

i'm looking to start on that honeycomb backplate as well, how did you attach the ams to that? or did you hang it on the wall directly?

@nirmata

Print Profile

0.2mm layer, 3 walls, 15% infill

It‘s working perfectly!

@Cruv1291

whats going on with those PTFE tubes there?

@nirmata

Replying to @Cruv1291 :

It's only a temporary solution to see how my AMS box works. I already made changes to that.

@Cruv1291

Replying to @nirmata :

I meant are you able to print from the box without the spool being attached to the AMS lite? Does it not have trouble reversing? I've been searching for a decent way to do dry boxes with the AMS lite myself.

@h1ckman

had issues with the holes holding the ams. i was going to reprint it but from looking at the other photos, it seems to be on most people's prints. any ideas?

The designer has replied

@Wolf3DP

It's just the nature of the bracket and hole placement. To have clearance and keep the holes located properly it left very little edge distance there unfortunately. Mine is like that too. It wont impact functionality:)

@h1ckman

Replying to @Wolf3DP :

ok, thanks. i added some little washer to beef it up a bit.

@Myanta

Replying to @Wolf3DP :

If you select "Detect thin wall" under "Strength > Walls" it will close that gap, but it would only be visual, not to add strength.

@morten.a.simons

Boosted

Print Profile

IMPROVED Model - Increased Clearance - Sturdier

printed perfectly and fit together snuck easy to install.

The designer has replied

@Wolf3DP

Thanks for sharing, looks great!

@Thedondesigns

Print Profile

0.2mm layer, 3 walls, 15% infill

My AMS arives next week looking forward to using this

The designer has replied

@Wolf3DP

If you have time I highly recommend printing the improved version of this model! It’s sturdier and has more clearance for spools. Enjoy!

@jmsanchezrey

Print Profile

0.2mm layer, 3 walls, 15% infill

Ideal solution to save space with the ams lite. Being two pieces, it moves a little but works very well.

The designer has replied

@Wolf3DP

I uploaded an improved version of this model that is a bit sturdier if you'd like to give it a try!

@user_1827660042

Print Profile

0.2mm layer, 3 walls, 15% infill

For me it's too close to wall, but overall Works great! A lot of space saved.

The designer has replied

@Wolf3DP

There is a spacer you can print as well to move it away from the wall a bit!

@BROW3D

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Thnks !

@linussyb

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

pretty fast but stil good quality

(Edited)

@lucology

Print Profile

0.2mm layer, 3 walls, 15% infill

Printed with PLA as mentioned, but I'm a little afraid that it's not strong enough to hold 4 rolls of filament.

The designer has replied

@Wolf3DP

I haven't had an issue with mine in PLA, so you should be alright. I have uploaded a more robust, improved version of this however if you're worried about it!

(Edited)