P1S Hotend Holder by mateiux

mateiux

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

Designer

5.6 h

3 plates

4.5(10)

Boost

111

174

Released

Description

Yet another hotend/accessory box … this box accommodates the “bend” in the wiring harness !!!

What you need other then the printed parts:

5 x M3x20mm screws
3 x M3 nuts

The tool I have and keep in the box is an “ RC Hex Screw Driver Tools Set 4in1” - look it up online, there are plenty of options to purchase … good for a quick hotend swap.

Comment & Rating (12)

@mufitozulug

Boosted

it is very helpfull. Do not tighten the rear screws too much and apply oil.

(Edited)

@Brut3T4nk

Print Profile

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

Very fucntional, keeps spare nozzles clean and organized. *First printe warped due to the text not being flush with the face of the lid. Chose to remove the text and printed nicely.

@tooru

Print Profile

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

盖子顶层的图案会导致翘边，切割掉0.2mm图案部分就好了

@mampfiee

Print Profile

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

Great

@Daks_House

Print Profile

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

printed great thx.

@JCM744

Print Profile

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

The bottom is a nice print. The top printed warped, three difference times, and the hinges are not strong enough and broke on all three prints.

The designer has replied

@mateiux

Hmmm... sorry to hear and thanks for letting me know, is it possible you overtightened the hinge screws. Thinking of designing hinge pins instead of screws, I might do a new iteration when I have some time ... I had no issues with warping - closed enclosure, PLA print (overture and bambu) on a carbon fibre textured print sheet ...