Dice Game

Note: I recommend checking out my newer version of this game here: https://makerworld.com/en/models/945846

This dice game is a family favourite! Print the board, grab or print 6 dice, and roll away. This game is sometimes called 10,000 or just Dice. The board is 240mm in diameter and has a ring that you glue on to contain the dice when you roll. I glued some felt on the bottom of the board so it slides smoothly on a table and to help muffle the sound of the dice rolling on the board. For game rules, search the web for dice 10,000 rules (aka Farkle). Note that some people play with different points but this is the version we play (e.g. rolling 3 1s is sometimes 1000 points instead of 300).

Glue the ring into the board. I ran a bead of thick CA around the slot in the board, installed the the ring, then put some weight on it to hold it while the glue dries. Easy peasy.

Print the board face-down to get a nice smooth finish. Make sure you have good adhesion because there are a lot of small print areas in the lettering.