Tesla rear camera shield by Drjonnes

Drjonnes

Hobby & DIY>Vehicles

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

45 min

1 plate

4.6(20)

Other Tesla 3 models addaptations

Designer

45 min

1 plate

4.0(4)

Open in Bambu Studio

Boost

111

268

467

310

Released

Description

Boost Me (for free)

If you like my design and found it usefull a boost is highly welcommend! :-)

Protect your tesla camera from dirt, grime, and the elements with this custom 3D-printed shield.

Designed to enhance the performance of your camera, this cover keeps the lens clean and ensures clear visibility at most times. Whether it’s rain, mud, or road dust, this simple yet effective solution helps maintain optimal image quality for parking, reversing, or recording. Easy to print and install! I used PETG as it is better for outside use :-)

If you've got any recommendations or optimizations, please let me know. The better the model the better the view from the camera!! So if you've got any suggestions, don't hesitate to give some feedback!

Only works for the TESLA MODEL 3 (not highland version) and only tested on 2021 model

Printing Details:

Recommended material: PETG or ABS for outdoor durability.
No supports required for a clean, precise print.
Lightweight design that doesn’t obstruct the camera view. Easy to install without glue..

Bill of Materials

Bambu Filaments

Black

A00-K0-1.75-1000-SPLFREE

× 1

Buy Now

Download BOM

Comment & Rating (59)

@Prof_X_01

in my case, the print did not fit properly as the fit was too close to the license plate so I couldn’t get it on, it would need to have a notch taken out for me to be able to use this model

The designer has replied

@Drjonnes

I see! I will update it today :-)

@Drjonnes

I have uploaded af new version. See if it fits! :-) Otherwise the photos and feedback are great so i can do more changes!

@SonOfUncleSam

Print Profile

0.2mm layer, 2 walls, 15% infill

Turned out really well! Printed in PLA as a proof of concept, and will reprint in ASA once the temps here get warmer. Thank you!

The designer has replied

@Drjonnes

Good to hear, thank you for the feedback! :) looks good!

@user_3667043709

In my case it doesnt stick. Too far from the license plate and it seems to have a bit much room around the camera at the underside. It slides on well and stays in place, but think I will lose it after a few meters. I have a Model 3 from december 2020

(Edited)

@Kaashaas

Same issue here with 2019 version model 3. I think the design doesn't fit this specific camera correct

@Jusii

Hi, your model showed a lot of interest in finnish Tesla model 3 facebook group. But many interested doesn't have a printer. Is it ok to print these and distribute them without additional fees, only postage? In the group there's several Model 3 owners, that could print these for those who are interested.

The designer has replied

@Drjonnes

Yeah for sure! :-) remember that I only know it works for 2021 model so check what camera people have :-)

@FinCatiska

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

I had some issues with strength and how it hold on my car. I lost that part always after machine wash.

@TonyPil

Print Profile

0.2mm layer, 2 walls, 15% infill

Other Issues:Doesn't fit the car/camera

The designer has replied

@Drjonnes

what model do you have? and year?

@TonyPil

Replying to @Drjonnes :

2020 Model 3 - Freemont build for EU

@Drjonnes

Replying to @TonyPil :

Yes it doesnt work for that model. As you see in the text it is not testet for that model

@reudiga

How does this part stay in place without glue or anything? How is it supposed to work?

The designer has replied

Show original

@Drjonnes

Speak English. Why do you think i speak german?

@reudiga

Replying to @Drjonnes :

Oh sry... cause the site translated everything... That was what i think you can speak german. I just asked, how did it hold? Without any tape? I have 2021 Model 3 but didnt fit well

(Edited)

@Einstakur3D

Replying to @Drjonnes :

Dude be nice to the people who are printing your designs and asking questions because that’s how your designs get more awareness , it doesn’t take long to copy and paste the text into google translate and then answering in English if makerworld doesn’t already translate the text for you Have some manners

@raphy

Hello I have just printed this, how do I attach it? any instructions? thanks

The designer has replied

@Drjonnes

Should fit right on. If you have a different tesla camera, some are using 3M tape :-)

@raphy

we have model 3 year 2021/2022. it looks like it was to big

@Llooping

Is it possible to make the model for Y 2023

The designer has replied

Show original

@Drjonnes

Speak english. The world does not speak french

@Llooping

Replying to @Drjonnes :

Can you do the same but for Y 2023 ?

@heijjan

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Prints well and quickly. Fits on my 9/2021 and my friend’s 2019 Model 3’s, but I’m guessing that it will require some doible sided tape to hold for longer time. Let’s see! Thanks for sharing.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.