This print is made with HueForge, https://shop.thehueforge.com/
Please follow the instructions below before printing.
(Note: I used bambu lab basic pla but since it only contains one layer shift it should work well with most black and whites.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Jade White for the rest.