Voice Assistant Case
Print Profile(1)
Bill of Materials
- SpeakerFabric x 1: https://amzn.eu/d/gVIzHro
Description
This is a case for a Raspberry Zero which is equipped with a ReSpeaker2 Hat and a loudspeaker.
This device functions as a Home Assistant Voice satellite / Rhasspy satellite.
The lid is covered with speaker fabric and has a button that presses the button on the ReSpeaker2.
Due to the recesses on the back, it is possible to connect a USB dongle and an external loudspeaker in addition to the power cable.
Simply apply a small amount of glue to the lid and stick the fabric on. Then place the lid on the housing and, if necessary, use a thin screwdriver to push the excess fabric into the gap.
The following speakers are provided:
Large Hole spacing 63x24mm - Case_L
Small Hole spacing 36mm - Case_S
German Version:
This is a housing for a Raspberry Zero that is equipped with a ReSpeaker2 Hat and a loudspeaker.
This device serves as a Home Assistant Voice Satellite / Rhasspy satellite.
The lid is covered with speaker fabric and has a button that presses the button on the ReSpeaker2.
Due to the recesses on the back, it is possible to connect a USB dongle and an external loudspeaker in addition to the power cable.
The lid is simply moistened with a little glue and the fabric is glued on. Then place the lid on the housing and, if necessary, use a thin screwdriver to push the protruding fabric into the gap.
The following speakers are provided:
Large Hole spacing 63x24mm - Case_L
Small Hole spacing 26mm - Case_S
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)