Ball Vice
Print Profile(2)
Bill of Materials
Description
Ball Vice
Update:
- Added a smaller, 80mm diameter version of the ball vice. Same bearing size as the 130mm version
A Ball Vice, usually a tool used by jewelers to work with rings.
It can be used to hold anything you want. Its very flexiby because the “head” rotates freely (or you can lock it) and the whole vice can be moved around the base.
Fill the bottom part of the sphere with sand, to make the whole vice bottom heavy. (this is required for a better experience)
You will need a bearing.
Bought a pack of 10 on Amazon. Should be easy to find.
Bearing size is:
6803ZZ 17x26x5mm (ID x OD x Thickness)
Instructions:
Assembly should be straightforward but there are 2 important points:
- Fill the bottom half of the sphere with sand and screw the lid in
Glue the handle with the tool key and the top of the jaw with the bottom of the jaw. (these were printed separately for print quality purposes)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (87)