Any ideas why. I got this black lettering fail
all upto date with firmware etc
I did send straight from the app off my phone as I don’t currently have a working laptop to slice anything
much appreciated
it has happened to me many times with brand new filament. I always dry the filament and see if that is the problem. if it’s not u will try to increase or decrease the nozzle temp. hope it helps!
I did it with the original holder on my first A1 before I had to return it, but had to fill the gap with two layers of double sided tape. This solution is much better.
I printed the holder only as this holder is extended on the mounting side allowing it to be mounted as where the print that came on my A1 the holder was to shallow on mounting side to mount with scraper installed. (see last 2 pic) pic 6 this print, pic 7 the Bambu print where back of scraper stick out to far to flush mount. It was a very clean print and I can finally mount my scrapper the way it was meant to be. My A1 tool kit came with the blade and screws to assemble.
The model is a quality one. You just have to remember to ungroup the objects otherwise the “blade storage support” module does not touch the printing plate and generates spaghettis… Once ungrouped and placed on the plate, no more worries.