Bambu Filament Spool Stackable Holder

This is a stackable bracket designed for my Bambu filament spool storage box. The bracket consists of three parts:

This is a stackable bracket designed for my bambu filament spool storage box. The bracket consists of three parts:

• Base standbase stand
• Shaft: 3 partsShaft: 3 parts
• outer diameter 40 mm PVC pipe (optional, can make the bracket stack higher and more stable)outer diameter 40 mm PVC pipe (optional, can make the bracket stack higher and more stable)

The following are printing and assembly instructions:

The following are printing and assembly instructions:

1. For better printing effect, it is recommended to enable tree support for the part 1.
   For better printing effect, it is recommended to enable tree support for the part 1.

   

2. The shaft consists of three parts, as shown in the above figure. After installing part 2 into part 1, install part 3 into part 2.
   The shaft consists of three parts, as shown in the above figure. After installing part 2 into part 1, install part 3 into part 2.

   

3. Assemble the shaft into the base.
   Assemble the shaft into the base.

   

4. If you want the bracket to stack higher and more stably, you can insert a PVC pipe with an outer diameter of 40mm into the through-hole of the bracket.
   If you want the bracket to stack higher and more stably, you can insert a PVC pipe with an outer diameter of 40mm into the through-hole of the bracket.

5. Enjoy!
   Enjoy!