Gridfinity baseplate for Bambu X1-Carbon printer by dakin80

dakin80

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

5.7 h

2 plates

4.5(17)

Open in Bambu Studio

Boost

222

215

Released

Description

A gridfinity compliant storage area for the top of a Bambu Lab X1-Carbon. Still permits access to control buttons on top of printer.

Has cutouts for 6mmx2mm circular magnets.

As well as the set of gridfinity mounts there are holders for two Bambu Lab glue sticks and one holder sized to accept the Bambu Lab scraper in its holder.

Printed with support enabled as there are overhangs on the components for the top of linking prongs and the cutout on the bottom for the glass lid handle. The parts should fit together snugly but the halves can be permanently glued together if required.

Some gridfinity bins you might find useful:

Tool bin:

https://makerworld.com/en/models/84735

Soldering tip bin:

https://makerworld.com/en/models/84731

Precision screwdriver bin:

https://makerworld.com/en/models/84730

Soldering tool bin:

https://makerworld.com/en/models/84744

gridfinity

x1c

Comment & Rating (25)

@jinivus

Print Profile

0.2mm layer, 2 walls, 15% infill

Incredibly useful! Thank you!

The designer has replied

@dakin80

Thank you for the rating. I like the digital caliper hanger which is presumably a modified gridfinity bin.

(Edited)

@jinivus

Replying to @dakin80 :

It is a modified gridfinity - I uploaded the model recently :)

@dakin80

Replying to @jinivus :

Gridfinity caliper holder: https://makerworld.com/en/models/145169#profileId-157923

(Edited)

@Stefan65745

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed very good.

The designer has replied

@dakin80

Thank you for the review and boost, much appreciated.

@brian.ralls.79

Print Profile

0.2mm layer, 2 walls, 15% infill

Great design!! The two pieces fit perfectly and my hot end holder nestled in without problem.

@bodenturnprinz

Print Profile

0.2mm layer, 2 walls, 15% infill

@Stas1005

Print Profile

0.2mm layer, 2 walls, 15% infill

@TucsonDave

Boosted

Awesome Idea and fits my needs perfectly!!

The designer has replied

@dakin80

Thank for the review and boost.

@BatNici

Print Profile

0.2mm layer, 2 walls, 15% infill

not a perfect fit

@khalidbrendansi

works well

@TucsonDave

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The designer has replied

@dakin80

Thank you for the rating and boost, gratefully received.

@lgcyaxi

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.