100mm PTFE Cutter AMS Protector Saver Super Duster
Print Profile(2)
Bill of Materials
Description
The small and very quickly printed tool offers a simple, repeatably accurate and safe way to cut the PTFE tubes between the popular AMS protectors/savers AND Super Duster. The cut edge remains precisely square.
This is how you can quickly and easily get the 100mm long PTFE tubes between your AMS protectors/savers and Super Duster. I personally recommend this length after a long period of experience with these little helpers!
The PTFE inserts in such a protector/saver are a wearing part and must be replaced (sooner or later depending on wear) - so it is a good idea to print such a PTFE cutter and then cut such inserts again as needed.
Simply push the 4mm PTFE tube (I recommend the PTFE from BambuLab Shop!) into the PTFE cutter to the end, take the two fingers in front of the finger stop and cut through the slot with the cutter knife, as shown in the pictures.
⚠️ Finger Stop helps you avoid injuring your fingers, but you have to be careful with the cutter knife! ⚠️
⚠️ How one user wrote 🙏: “..your plate scraper will cut the PTFE tube clean enough, no need for a cutter knife!”
PLA/PETG/ABS - no matter, they all will work for this design!
🔊 This tool is a perfect help for ALL versions of the AMS Protector/Saver and Super Duster:
 |  |  |
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (232)