A case designed to house the ESP32 display and mount to a shelf or free standing. This display loaded with the XTouch software gives you a touch interactive and informative display to control and monitor your BambuLabs printer. I found the best orientation to print is shown in image 3.
Machine Configuration -
Printer: BambuLab P1S
Plate: Textured PEI Plate
Hot end: 0.4mm hardened steel nozzle
Filament: Bambu Labs Matte PLA
My Process settings for this print
0.16mm Standard - Default with the below changes -
Strength-
Wall Loops - 3
Detect Thin Walls - Checked
Sparse Infill Density - 40%
Support-
Enable Support - Checked
Type - Normal(auto)
Others-
Brim type - No-brim
Nuts and Bolts
4x M2.5 x 12mm x 0.45p Metric Coarse Stainless A4-70 G316 Socket (T8)
https://www.boltandnut.com.au/machine-screws/cap-head/m2-5-x-0-45p-metric-coarse-stainless-a4-70-g316-socket-t8-machine-screws-iso-14579
4x M2.5 x 0.45p Metric Coarse Stainless A4-70 G316 Hex Nyloc Nuts
https://www.boltandnut.com.au/m2-5-x-0-45p-metric-coarse-g316-stainless-hex-nyloc-nuts
Display
ESP32 Arduino LVGL WIFI & Bluetooth Development Board 2.8" 240x320 Smart Display
https://www.ebay.com.au/itm/374612513389
8/16GB Micro SD Card
In order to configure the display to connect to your machine, check out the below linked YouTube video
https://youtu.be/ZLbnodw8WMw?si=s1RXh7XSJZjHl1fW