Boden Tube Guide (v1)

I have designed a boden guide to allow filament rolls to be hung above my machine allowing the filament to be fed smoothly to the rear of my P1S printer. I found the best orientation to print is shown in image 3.

Machine Configuration -
Printer: BambuLab P1S
Plate: Textured PEI Plate
Hot end: 0.4mm hardened steel nozzle
Filament: Bambu Labs Matte PLA

My Process settings for this print
0.20mm Standard - Default with the below changes -

Strength-
Wall Loops - 4
Detect Thin Walls - Checked
Sparse Infill Density - 44%

Support-
Enable Support - Checked
Type - Normal(auto)

Others-
Brim type - No-brim

Bolts and Nuts - 
6x M2.5 x 6mm x 0.45p Metric Coarse Stainless A4-70 G316 Socket (T8)
https://www.boltandnut.com.au/machine-screws/cap-head/m2-5-x-0-45p-metric-coarse-stainless-a4-70-g316-socket-t8-machine-screws-iso-14579
6x M2.5 x 0.45p Metric Coarse Stainless A4-70 G316 Hex Nyloc Nuts
https://www.boltandnut.com.au/m2-5-x-0-45p-metric-coarse-g316-stainless-hex-nyloc-nuts
2x M3 x 10mm x 0.50p Metric Coarse Stainless A2-70 G304 Cap Torx (T10) Machine Screws
https://www.boltandnut.com.au/machine-screws/cap-head/m3-x-0-50p-coarse-stainless-a2-70-g304-cap-torx-t10-machine-screws-iso-14579
 

Other Hardware

2x LEOWAY PC4-M10 Male Straight Pneumatic PTFE Tube Push in Quick Fitting Connector for E3D-V6 Long-Distance Bowden Extruder 3D Printer (Pack of 10pcs)
https://www.amazon.com.au/dp/B07HMDR2PD?psc=1&ref=ppx_yo2ov_dt_b_product_details