These tiny clips keep the Hultarp hook in place. They allow for a free swivel, but will stop the hook from being lifted.

You need 2 parts per hook with total print time @ 5 minutes and 0,4g of filament.

• insert
• clip

Please PRINT MULTIPLE pieces, as they are small and relatively brittle during installation.

Printing:

• layer height max 0.2mm
• any material PLA/PETG,…
• printing orientation as shown in pics
• no supports/brim

Installation:

• with hook in place, lift it and fit the insert into hole from behind
• then, insert retaining clip in the groove