Wall hook

Wall hook

Boost
57
99
1

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.16mm layer, 8 walls, 15% infill
0.16mm layer, 8 walls, 15% infill
Designer
2.7 h
2 plates
5.0(1)

Boost
57
99
1
5
64
37
Released

Description

I was searching for a proper way to store/hang the jackets/coats - as we are quite demanding for aesthetics, this is what I designed and printed. I decided to make the lower hook thinner for smaller things, whereas the top is thicker and less pointy for hoods.

Initially I planned to also cover the hole for screw, but after finding the oxidized screws, I decided to leave it as is.

It is to be used with fi~ 3.8-4 mm conical screw (max head diameter 8mm, hole opening is 4mm).

Printed for test in basic PLA, final ones printed using PLA-CF, that guarantees that layer lines disappears and additionally improves stiffness.

Printed with 8 wall loops as well as 8 layers top/bot to further improve the mechanical durability.

I printed two mirrored variants and mixed them on the wall. Both are provided on separate plates.

 

Comment & Rating (1)

Please fill in your opinion
(0/5000)

Print Profile
0.16mm layer, 8 walls, 15% infill
printed great. thanks for uploading. I used Petg
1
Reply
No more