Elegoo ReflexRS Build Platform Drip Tray Heygears Platform Drip Tray - Short Version

This version is a short variant, better suited for FDM printing

Other versions:

Platform short variant, flat placement: https://makerworld.com/en/models/768179#profileId-703658

Platform long variant, flat placement: https://makerworld.com/en/models/707889#profileId-638028

Platform angled placement: https://makerworld.com/en/models/954355#profileId-923006

Platform L-bracket: https://makerworld.com/en/models/948942#profileId-916408

Suitable printer: Elegoo Mars 3 Pro

Accessory function: Facilitates rapid resin dripping from the build platform

Usage: After printing, clip this accessory onto the resin vat, then remove the build platform and attach it to this bracket

Precautions: Note the printing orientation (should be placed vertically), tree supports are necessary, avoid printing flat. Materials such as ABS, PETG, or even PLA are generally suitable

This model is freely shared; commercial use, printing for sale, etc, are prohibited

Addendum:

Due to the presence of a red component in the photographs accompanying the aforementioned share, some individuals in certain online groups have made unfounded criticisms. These individuals failed to consider or verify that this share pertains only to the black vertical platform support shown in the photographs. Given this unwarranted defamation, I am publicly releasing the design for the red component. Note: This red component was personally designed and prototyped by myself

Download link for the red bracket: https://makerworld.com/en/models/948942#profileId-916408