Sovol gridfinity rugged case

I love the gridfinity system from Zack Freedman. And the rugged boxes from Akio work quite well for me to store some brand specific hardware or tools etc. but I own a few other brands of 3D printers so I wanted to make one for my Sovol machines. So I removed the bambu logo and replaced that with a Sovol logo.

There are two ways to connect the lid to the bottom first of all by just using the pins that i added in the profile or by using 6 M3x30 screws.

The handele still needs to be mounted with 2 M3x18 screws but didn't have enough 6x30 screws for all the containers I've printed.

6U and smaller Gridfinity bins fit inside the 5x4 rugged gridfinity case

Also added the step for the optional TPU seal but personally I didn't use it.

A comment, like or an photo of your make would be nice. And if anything should be changed or if something went wrong let me hear that as well so that I can have a look and get it solved.