Flashforge gridfinity rugged case

I love the gridfinity system from Zack Freedman. And the rugged boxes from Akio work quite well for me to store some brand specific hardware or tools etc. but I own a few other brands of 3D printers so I wanted to make one for my Flashforge machines. So I removed the bambu logo and replaced that with a Flashforge logo.

There are two ways to connect the lid to the bottom first of all by just using the pins that i added in the profile or by using 6 M3x30 screws.

The handele still needs to be mounted with 2 M3x18 screws but didn't have enough 6x30 screws for all the containers I've printed.

6U and smaller Gridfinity bins fit inside the 5x4 rugged gridfinity case

A comment, like or an photo of your make would be nice. And if anything should be changed or if something went wrong let me hear that as well so that I can have a look and get it solved.