Attention! The coil consists of two parts!
Update: ESUN made new spool with diameter 76mm. Added v2 version
It is too expensive to print adapters. The adapter should provide excellent clamping of the side faces, I will try to come up with something.
Additional details:
2 or 4 M4x45 screws (acceptable M4x50, there may be problems with bulging)
2 or 4 M4 nuts
There was a problem called "Cardboard Coil", the solutions that ESUN offered work disgustingly. Of the 4 coils, their adapter fit only one. This solution solved the cardboard problem in the Bambu Lab AMS system.
Second problems - spool Bambu Lab it has a width of 58mm versus 52mm ESUN. For me, this led to a stall and entanglement of the filament in the spool