Ice Scraper with STEP File
Copyright Claim
Ice Scraper with STEP File
Boost
24
38
24
Print Profile(2)
0.08mm layer, 2 walls, 15% infill
Designer
2.3 h
1 plate
infil adaptive cubic 0.2mm layer, 2 walls, 15% infill
1.1 h
1 plate
Open in Bambu Studio
Boost
24
38
24
0
94
130
Released
Description
Quick and easy to print Ice Scraper. Has a convex inner lip to go over the windscreen.
Video in action
Comment & Rating (24)
All
Print Profile
0.08mm layer, 2 walls, 15% infill
very good
The designer has replied
0
Reply
Looks great! Thank you!
0
Reply
Print Profile
infil adaptive cubic 0.2mm layer, 2 walls, 15% infill
👍
0
Reply
Now that looks classy!
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
good design fits comfortably in the hand. plenty of uk ice around to test in the morning. Right sort of size, wonder whether its better to print with the scrape face on the plate and have a more rounded handle in the design
The designer has replied
0
Reply
Certainly give it a try, however the lip isn't flat to the bed but you could drag it down through the bed a mm or so. Let me know how it works for you?
0
Reply
Print Profile
infil adaptive cubic 0.2mm layer, 2 walls, 15% infill
Quick and easy and much stronger than I was expecting.
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
it works well!!
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
This print profile requires a quality filament. Poor quality has a problem with overhangs
(Edited)
0
Reply
but does it work well? my store one broke need a new one
The designer has replied
1
Reply
It does a decent job for the mild UK Winters, wouldn't recommend for inch thick ice :)
0
Reply
Also added a video of it in action!
0
Reply
Replying to @StuGre
it does! cf nylon print.
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
works very well
The designer has replied
1
Reply
Thanks! You can amend the sketch in the STEP file to make it larger / smaller and more curvy curves should you wish!
0
Reply
Print Profile
infil adaptive cubic 0.2mm layer, 2 walls, 15% infill
Printed in PETG, very solid! Thanks!!!
0
Reply
Print Profile
infil adaptive cubic 0.2mm layer, 2 walls, 15% infill
leider nicht ganz glatt. funktioniert so halbwegs
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
© 2024 MakerWorld