A simple arca mount for the Garmin Xero C1 Chronograph. Tested and Chrono is 100% functional with this mount. Arca slot designed to be snug on an MDT arca rail and spaces the chronograph out to clear MDT side weights. The ledge on the mount prevents the chrono from rotating about the screw.
Provided an additional hole which can be tapped ¼-20 for a screw to apply tension to the rail if needed. The hole is designed to line up with the R-Lock indentations. Tap the top screw storage hole ¼-20 to store the screw when not in use. You will need a ¼-20 x 1/2in long hex head bolt. The flat-flat dimension on my bolt was 11mm and the knurled knob is intended to be a very tight fit on that size head. No glue required.
Note: The attached photos are of a personalized version. The model included does not have the logo.