Easily mount your Garmin Xero chronograph to your bow! Use the Thread On version to sandwich it between your stabilizer (0.75in diameter or less) and the bow's riser. If you have a quick connect style stabilizer, the quick connect version may work for you. It is designed to work with my trophy ridge front stabilizer w/ quick connect. Make sure to hold the bow very still following the shot for the chrono to record.

There are 2 pieces - the mount itself with a shelf to prevent rotation of the Xero when it is mounted, and a knurled thumbscrew. Tap the top screw storage hole ¼-20 to store the screw when not in use. You will need a ¼-20 x 1/2in long hex head bolt. The flat-flat dimension on my bolt was 11mm and the knurled knob is intended to be a very tight fit on that size head. No glue required. If you don't have a tap you can thread the bolt in before installing the knob - just be careful and aware the model will bulge a little and can split.