Bambu Spool Buddy by Functional Print FridayMakerWorld: Download Free 3D Models

Functional Print Friday

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

0.2mm layer, 2 walls, 17% infill

Designer

3.6 h

1 plate

5.0(383)

Single Color, 0.24mm layer, 3 walls, 5% infill

1.5 h

1 plate

4.9(193)

Open in Bambu Studio

Boost

1522

4243

759

1 k

3.3 k

2.2 k

Released

Description

Tool for assisting in the loading of the cardboard hub'd refills onto the Bambu Labs refillable / reusable spools.

Comment & Rating (759)

@infamous61

Boosted

I found your model while surfing YouTube. I am glad to see you posted this model. You put a lot of work into it. I did look here (so maybe I could comment) and was concerned that someone else had posted it first. (They did give credit to you.) I do use a lot of the Bambu refills and have came across a couple of the bad spools and after watching your video I knew this was going to be something I had to print. I did use up some filament remnant to start the print. Good use for that as I don't think it will be an issue.

The designer has replied

@fpfdesigns

looks good!

@BMC_Fabrication

Print Profile

0.2mm layer, 2 walls, 17% infill

👌 Love it and hope I don't need to use it but have it available if so. Thank you. New subscriber here.

The profile uploader has replied

@fpfdesigns

thx and welcome

@user_2877538490

Boosted

Print Profile

0.2mm layer, 2 walls, 17% infill

Spectacular Job Rich! What an Awesome little tool. Thanks for the great model!! Keep up the great work with FPF.

The profile uploader has replied

@fpfdesigns

thx

@eduardogodoypla

Boosted

Print Profile

0.2mm layer, 2 walls, 17% infill

love this tool! works great!

@eeeeivind

Boosted

Print Profile

0.2mm layer, 2 walls, 17% infill

Saw the video, never had the issue... yet... Just printed, no issues, hoping I'll never need to use it... 😆

@Cuddly.Goblin

absolutely, same reason I’m here.

@ToolMAKR

Boosted

Print Profile

Single Color, 0.24mm layer, 3 walls, 5% infill

Thank you. it works well. I could not hammer in a filament strip without to much force so I used a fine point Sharpee.

@Bulan84

Print Profile

0.2mm layer, 2 walls, 17% infill

Perfekt passform. Men har inte testa med refill rulle än då jag inte fått hem några än.

@Robsgarcia

Print Profile

0.2mm layer, 2 walls, 17% infill

I didn't know i needed this until i saw it.

@user_1047039081

Boosted

LOL!! Me, too. 😁

(Edited)

@3Dja

Boosted

Print Profile

0.2mm layer, 2 walls, 17% infill

Great tool! Works really well for those banged up Bambu refill cardboard cores. The damaged cores seem to come in bunches and when they do, this little gem makes it a breeze to slide onto the spool. The alignment slot (filled with a piece of filament) makes it a breeze. Thanks for sharing.

@user_2890587055

thanks for giving enough information to know what this thing does! The blurb says nothing.

@Hot.end

Print Profile

0.2mm layer, 2 walls, 17% infill

It looks great, but I have not tested it yet, since I am still waiting for my first refill delivery. Thank you for the excellent video. I don't have a fancy soft hammer like you, but a normal hammer works great for seating the guide filament.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.