Tree of Life - USB dimmable night lamp

Treat yourself to relaxing moments with a lamp that carries the magic and wisdom of the symbol of the tree of life. This lamp is more than just a source of light - it is a connection between nature and spiritual knowledge that provides us with the most intimate lighting for our moments of peace and relaxation.

An ancient symbol associated with philosophy and spiritual meaning, the Tree of Life represents the endless cycle of life and renewal. Its roots embedded deep in the earth symbolize the connection with our roots, our past and heritage. Its branches stretch upward toward the sky, depicting our desire to grow and develop.

It is convenient to print the lamp from PETG material. When using PLA, deformation could occur if a more powerful LED strip, which heats up more, was used.

Lamp parameters:

Lamp diameter: 20cm

Total height with stand: 22.5 cm

Removable stand

Possibility of hanging on the wall

Continuous regulation of lighting intensity

Light color: warm white

Power supply from USB adapter: 5V/ 1A

Length of power cable: 150 cm

Connector type: USB A

Can be used as a standing or wall lamp

In addition to the printed parts, you will also need:

5V 5mm COB Light Strip or 5V USB LED Strip - warm white

4x screw 2.9x13 mm

2x M4x8mm screw

USB adapter 5V 1A

USB Port Power Supply Cable DC 5V LED Dimmer 2pin

Assembling the lamp

Start assembling the lamp by threading the power cable through the back cover and screwing it to the back wall with four screws. Stick the LED strip around the perimeter of the lamp. Insert the "glass" into the front part and put the whole thing on the back part. The latches must fit into the recesses in the back part. Nothing needs to be glued. If you want to use the lamp as a table lamp, assemble the stand by inserting the parts into each other and screw two M4x8mm screws into the holes in the upper part, on which the lamp will hang. You must not tighten the screws completely, there must be a gap under the head. If you want to use the lamp as a wall lamp, you do not need to print the stand and hang the lamp directly on the wall.

With its pleasant light, the lamp will create a pleasant and relaxing atmosphere for moments of relaxation, rest or meditation.

If you like my models, I will be happy if you give a Boost, Like, Follow, or Share with your friends.

Don't forget to check out my other models too.

Show all models