The Counter-Spinner
Copyright Claim
The Counter-Spinner
Boost
8
14
2
Print Profile(1)
0.16mm layer, 4 walls, 50% infill, No Support, No Brim
Designer
47 min
1 plate
Boost
8
14
2
0
27
19
Released
Description
A 2-in-One fidget spinner. Spin both parts one way, or the other way, OR counter-spin them!
You need 2 quality 608ZZ bearings for the hubs (I used ceramic Freeport SpeedDemons which I got cheap in a Black Friday Amazon sale) and 4x any old rubbish bearings for the rotational weights.
Print in one colour, or slice and print all the parts separately for a multi-coloured Counter-Spinner.
NO GLUEING - printed screw fit parts and push-in parts only!
NO SUPPORTS and NO BRIM - Just print at 0.16mm layer height, with 4 wall loops and 50% infill for strength.
Comment & Rating (2)
All
Print Profile
0.16mm layer, 4 walls, 50% infill, No Support, No Brim
when I put it to gether the two spinners fell of. They measured the pole wrong
0
Reply
Print Profile
0.16mm layer, 4 walls, 50% infill, No Support, No Brim
(Edited)
Other Issues
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld