Planetary Gear by H3ck3rM!lch

H3ck3rM!lch

Toys & Games>Other Toys & Games

GIF

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Smooth+Grip Version 0.2mm layer, 2 walls, 15% infill

Designer

3.2 h

2 plates

4.9(28)

0.2mm layer, 2 walls, 15% infill

1.7 h

1 plate

4.9(12)

Sturdier + gyroid infill - 0.2mm layer, 3 walls, 20% infill

1.6 h

1 plate

4.8(9)

0.18mm layer, 2 walls, 15% infill

3.5 h

2 plates

Click to see more

Boost

213

387

946

814

Released

Description

Planetary Gear Toy

Smooth and Grip version

Printing with good filament and correct setting is important (Black version is from esun PLA Matte (generic pla preset) / Green is Bambu PLA Basic(Bambu PLA Basic preset))

a version from another Brand (DAS FILAMENT) didnt work well it jams very often

Comment & Rating (53)

@OriandIdo

Print Profile

Smooth+Grip Version 0.2mm layer, 2 walls, 15% infill

maybe the tolerance can be a bit smaller for smoother fidgeting but awesome!

The designer has replied

@H3ck3rMilch

What filament and settings did you use? I printed one with filament from a small brand and the preset generic PLA, and it doesn't spin very well. Maybe I will upload a version with looser tolerances.

@OriandIdo

Replying to @H3ck3rMilch :

Sorry for being unclear, I think that the tolerances even should be tighter :)

@bomb99

Print Profile

0.2mm layer, 2 walls, 15% infill

The gears were initially stuck together slightly, probably due to the generic PLA that I used, but after giving the outer circle a squeeze and loosening up the gears, it’s super smooth to spin.

@sago35

Print Profile

Smooth+Grip Version 0.2mm layer, 2 walls, 15% infill

Perfect. It runs very smoothly.

@user_4212704863

Print Profile

Smooth+Grip Version 0.2mm layer, 2 walls, 15% infill

Works like a dream

@TacMac

Print Profile

Sturdier + gyroid infill - 0.2mm layer, 3 walls, 20% infill

very minor clean up on one of the gear teeth, but after that it spins great.

@Smoothies1

Print Profile

Smooth+Grip Version 0.2mm layer, 2 walls, 15% infill

Great print!

@user_135010257

Print Profile

Smooth+Grip Version 0.2mm layer, 2 walls, 15% infill

first print on printer

@travisstaker

Print Profile

0.2mm layer, 2 walls, 15% infill

I’ve printed things like this before on other printers and none of them worked as well as this. Good job on the design. The tolerances are perfect on the A1.