Search models, users, collections, and posts
dragon
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.9 h
1 plate
Open in Bambu Studio
Boost
12
22
3
1
2
1
Released
Description
Content has been automatically translated.
Print with 100% infill, 0.08 layer height, and 0.16 base layer.
It is also advisable to reduce the retraction to 0.6 mm.
Filaments used:
Bambulab PLA Basic Black with a transmission distance of 0.3.
Bambulab PLA Basic Red with a transmission distance of 5.0.
Bambulab PLA Basic Brown with a transmission distance of 2.0.
Bambulab PLA Basic Orange with a transmission distance of 7.0.
Bambulab PLA Basic Beige with a transmission distance of 8.0.
Bambulab PLA Basic Jade White with a transmission distance of 5.0.
Filament changes:
Let's start with black.
Switch to red at layer no. 8.
Switch to brown at layer no. 13.
Switch to orange at layer no. 16.
Switch to beige at layer no. 23.
Switch to white at layer no. 25 until the end.
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (3)