Stone Dragon on Rock by sduppleganger

sduppleganger

Art>Sculptures

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 10% infill

Designer

2.3 h

1 plate

3.9(7)

Open in Bambu Studio

Boost

133

232

151

Released

Description

A stone dragon… sitting on a stone!

Please note that the cover image has not been transformed 100% accurately into the 3D model. You can see the final print on the bottom left in the cover image, and in the rest of the photos. I ‘painted’ the print using a black color spray coat, followed by a thin coating with white color spray.

If you like this art, you may also like my other Dragon Emerging from Stone sculpture, Dragon on a Pedestal sculpture, Dragon Origami, Dragon Anatomy, Dragon Emerging from Picture Frame, and others in my profile page.

Boost Me (for free)

Want me to upload more pieces of art in this style? Kindly donate a boost so I know there's interest in this style!

Comment & Rating (15)

@user_1932835556

Print Profile

0.2mm layer, 2 walls, 10% infill

No infill on the neck and it snapped

The designer has replied

@sduppleganger

That's really strange. Didn't happen to me. Maybe it's about the filament you use? Try increasing the infill percentage.

@user_1932835556

Replying to @sduppleganger :

I'm going to but if a greater infill percentage appears needed (based on other comments) shouldn't the .stl be updated? Also, there is zero infill in the dragons neck where mine snapped.

@sduppleganger

Replying to @user_1932835556 :

It worked well for me and for others, so my assumption is that something's wrong either with the material you're using, or with the printer configuration. I'm afraid I can't fit the STL for every possibility :(

@Martyn_lviv

Print Profile

0.2mm layer, 2 walls, 10% infill

A problem near the front leg

Show original

@han_solo

if i open this in bambu studio it has absolutly no details at all. waste of resources.

@AMT.TJKim

Print Profile

0.2mm layer, 2 walls, 10% infill

Bed Adhesion Issue:??????????????????

The designer has replied

@sduppleganger

The model has a flat, wide surface. The only reason I can think for you encountering bed adhesion issues, is that your printer isn't calibrated. Or maybe something with the printing material?

@user_1664123214

Print Profile

0.2mm layer, 2 walls, 10% infill

@user_3487191383

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

@user_149849313

Print Profile

0.2mm layer, 2 walls, 10% infill

@shawn0856

Print Profile

0.2mm layer, 2 walls, 10% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Ooo Rocks

Atro

1.3 k

1.8 k

Print Profile(1)

Description

Comment & Rating (15)

License

Related Models

Ooo Rocks

Rock Stone Clock

The Rock Dragon - TRD

Rock Minions - Minions with the rocks face