AMS Lite Drying Solution

Addresses the lack of a drying system in the AMS Lite.

After printing, only one quarter of the body and lid are printed, requiring two trays to print four times each. (This is intentionally split into quarters for smaller machines. Otherwise, the smaller machines would be too large).

After printing four times, glue them together using hot melt glue or white glue, place them on the AMS Lite, secure them with tape, place the filament spool and desiccant (it can be placed together, there is no space for the desiccant), then thread the filament out of any of the four holes, install it on the feeder, and then close the lid.

This model is adapted to the official Bambu Lab filament spool size.

It is recommended to print with transparent filament.

There has been no testing yet, please contact yanzhiyouli713@163.com for any issues.