Print In Place Box With Magnetic Closure
Copyright Claim
Print In Place Box With Magnetic Closure
Boost
28
51
10
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
54 min
1 plate
0.2mm layer, 2 walls, 15% infill
57 min
1 plate
Open in Bambu Studio
Boost
28
51
10
1
112
63
Released
Description
The Print In Place Box With Magnetic Closure !
It's an easy print, without supports, already orientated correctly, in STEP & STL & 3DM files.
magnets are: dia4.0mm, height 1.85mm.
Update:
Due to many requests, I reduced the tolerances in the boxes hinge, now its spouse to be Pretty tight.
Additional files:
Box_Tight Tolerance - (.3mf)/(.STEP)
Enjoy!
Comment & Rating (10)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Quick clean print, hinge action is slick once freed (tighter tolerance version).
0
Reply
Printed in Silver Bambu PLA Basic. I modified the STEP file to take 6x3mm magnets as that's what I had in hand. I also needed a slightly larger box so I extended by 10mm width and 5mm breadth. Nice quick print, hinge action is slick once freed and not loose at all. I did print the tighter tolerances version.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
love this to store fishing flys in just glue some foam in one side
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
(Edited)
Strength Issue:flimsy
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld