NO MAAM Lightbox
Copyright Claim
NO MAAM Lightbox
Boost
10
16
4
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
4.9 h
2 plates
Open in Bambu Studio
Boost
10
16
4
0
19
15
Released
Description
If you don't print the print profile you need to load Frame, Front White, Front Red and Front Blue at the same time into BambuStudio.
Electronics:
I used a 12V LED light strip, a DC barrel connector, a 12 V power supply and some wires
The power supply and the DC barrel connector I used
https://www.amazon.de/dp/B016LV20X6?ref=ppx_yo2ov_dt_b_product_details&th=1
https://www.amazon.de/dp/B09PD6J4BN?psc=1&ref=ppx_yo2ov_dt_b_product_details
Assembly:
- Print the Front and the Back part. There are no holes in the model, just add the holes via Bambu Studio. It depends on your light strip or if you want to use a barrel connector. U can also just use a drill.
- Measure the length of the light strip and then cut it to length.
- Solder the wires and the barrel connector to the light strip
- Mount everything into the front part
- Fore the back part I used normal aluminum foil with some double sided tape to reflect the light. See pictures
- Close the box
For more details check this light box.
Comment & Rating (4)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
When people ask "what exactly do you do with your 3D printers?"
This one was commissioned by the legend that scored 4 touchdowns in the 1966 city championship game at Polk High.
IYKYK
The designer has replied
0
Reply
😂😂
0
Reply
How did you mount the frontplate? The frame is to big to hold it!
The designer has replied
0
Reply
What do you mean? The Front and the Frame should be 1 piece... The back slides on the Frame. Could you add a Photo?
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld