Scraperlite Plastic Razor Blade Handle V2 Remixed by jjjlee

Remixed by

jjjlee

Tools>Other Tools

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 4 walls, 15% infill

Designer

34 min

1 plate

4.9(20)

0.2mm variable layer height, 4 walls, 15% infill, No Magnets

34 min

1 plate

4.8(9)

X1C PCTG - No magnet - 0.2mm layer, 4 walls, 15% infill

55 min

1 plate

Open in Bambu Studio

Boost

213

200

Released

Description

Remixed from the version uploaded by @ericsnis

UPDATE (2023-11-03)

Added 10mm to overall length (better ergonomics
Changed the front edge angle for a lower approach angle as I needed a lower angle sometimes. This will mean added supports (see image below)
Thumb indentation 1mm deeper and improved shape for better printing
rounded off back corners.
There are two versions. One with pockets for magnets (SCRAPERITE HANDLE_V2_MAG), one without (SCRAPERITE HANDLE_V2)

For magnets: I just used what I had on hand, which aren't very strong, but do the job. You can purchase it here: Aliexpress

Pause at layer 24 (if using 0.2mm layer height) or 2.6mm, insert magnets using double-sided tape then resume.

Supports: add to areas in green.

Iterative revision to both suit my aesthetic preferences as well as added a slight functional upgrade with the new grip texture on the sides.

Images show it printed with:

0.2mm layer height
Need supports under square holes under the blade + chamfered front edge
eSun PLA+, matte
Used 4 layers for wall thickness
15% Gyroid infill

The blades fit super tight as per the original model.

Created from STEP file for better resolution of curved features.

Comment & Rating (30)

@smashd

Print Profile

0.2mm layer, 4 walls, 15% infill

Printed nicely, even with my old transparent PETG the support was easy to remove. Plastic blade fits snuggly, thumbs up!

@nitrodude150

Print Profile

0.2mm variable layer height, 4 walls, 15% infill, No Magnets

solid profile! worked perfectly!

@neddy990

Print Profile

0.2mm layer, 4 walls, 15% infill

Printed in pla, supports came off fairly easily and it works well. 👍

@kunee

Print Profile

0.2mm layer, 4 walls, 15% infill

printed and works great, thanks

@bringle

Print Profile

0.2mm layer, 4 walls, 15% infill

ended up using petg support interface and the blades fit in easily but snuggly. great model!

@szili83

Print Profile

0.2mm variable layer height, 4 walls, 15% infill, No Magnets

Useful for the plastic blades.

@APEngineering

Print Profile

0.2mm layer, 4 walls, 15% infill

@kbsmakes

Print Profile

0.2mm variable layer height, 4 walls, 15% infill, No Magnets

Perfect pressure-fit handle for my plastic blades.

@Liquidretro

Works well, I printed in PETG for more durability.

@user_3113531789

Boosted

Print Profile

0.2mm layer, 4 walls, 15% infill

Ideal for the plastic razor blades found on amazon etc. The first insertion of a blade takes quite an amount of force but with PLA deforming a bit over time the subsequent blades fit perfectly.