Original art created by us, then we used Hueforge to create this 200x200 piece.
Please share your prints
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal
PLA BambuLab Basic BambuLab Green
PLA Sunlu Green
PLA BambuLab Basic Jade White
Swap Instructions:
Start with Charcoal
At layer #5 (0.48mm) swap to BambuLab Green
At layer #10 (0.88mm) swap to Green
At layer #17 (1.44mm) swap to Jade White for the rest.