Cable Markers
Print Profile(2)
Description
There are so many cables in the house where I live that I always start looking for the right cable again. Markings with tape or pen fade over time or are so unreadable that I end up testing the wires again
These markers are meant to put an end to that. One goes on each end of the cable, making it clear which cable is where
The top and bottom parts should be printed separately
When printing the top parts, at least two layers (the 2nd and 3rd) should be printed in white, otherwise readability will be very poor
The telephone markers fit well on Cat-5 cables or telephone cables with a diameter of 5.7 - 6.5 mm. The satellite markers are made for cables around 7mm in diameter
Update 8.11.25
I have created a new Version 2 that can now be printed effortlessly with an AMS. The .step files are labeled V2, and the print profiles are called “Sat AMS” and “Telefon AMS”
-------------------
There are too many cables in my house. I always have to search which one is for what. Now, with these markers this should have an end
Print the tops and bottoms separate. When you print the top parts then print at least 2 layers (the second and third) in white, otherwise the readability is very limited
The parts with the telephone suits cable diameters from 5.7 to 6.5 mm, i.e. Cat-5 cables. The sat markers are for cables with a diameter around 7 mm
Happy marking!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)