Fidget Snake Print-In-Place by fixoid

fixoid

Toys & Games>Puzzles

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

8 segments, 0.2mm layer, 2 walls, 15% infill

Designer

1.4 h

1 plate

4.8(6)

The key to unplug corner sections

Designer

19 min

1 plate

5.0(1)

24 segments, 0.2mm layer, 2 walls, 15% infill

Designer

3.2 h

1 plate

3.3(3)

4 segments, 0.2mm layer, 2 walls, 15% infill

Designer

57 min

1 plate

4.0(1)

Click to see more

Open in Bambu Studio

Boost

204

188

Released

Description

This is the print-in-place version of the fidget snake: https://makerworld.com/en/models/63513

There is files for Snake with 4, 6, 8, 12, 24 sections.

I recommend printing the shortest one first to check for any issues with movements.
Additionally, you can print a key box (last profile) to facilitate the easy unplugging of the corner segments of the snake.

Tested it with Bambu Lab PLA filament on P1S printer.

Comment & Rating (22)

@boris.sverdlik

The end pieces are a bit hard to get loose but i think turning down flow 1% would have been perfect. Kid loves it. Thanks for the design

The designer has replied

@fixoid

Thanks for the feedback! You can use a key-box to unplug end pieces much easier.

(Edited)

@mxmark4

do you need any thing to keep it together?

The designer has replied

@fixoid

Hi, all pieces are printed joined. You can play with it just after the print is finished.

@mxmark4

thanks!

@christopher.att

Print Profile

12 segments, 0.2mm layer, 2 walls, 15% infill

wouldnt move

The designer has replied

@fixoid

Could you share printer and plastic you use? Profile is designed for Bambu Lab PLA Basic Plastic, and it is expected that if you use another brand/type you need to play with print settings a little.