PTFE Lid for cereal box - dry box
Print Profile(2)
Description
As you can see in the photos, I achieved excellent results. If you get poor results, please check your filament and settings before leaving negative feedback. Issues are often caused by old or damp filament, a poorly calibrated printer, etc.
Boost Me (for free)
If you like my model, click on 'Boost Me'
Caution: This model is designed for PTFE Connectors PC4-M10.
If you need a PC4-M6, you will need this model:
https://makerworld.com/en/models/1085540#profileId-1078259
This model allows stacking the boxes without being obstructed by the PC4_M10 connector.
This model allows for storing filament spools and printing without removing the spools from the airtight boxes.
If you need a cap for the PTF Connector, check here: https://makerworld.com/en/models/724494#profileId-655640
The cereal box I use is this one:
Printed with Transparent PETG but you can use the filament of your choice.
The model is the perfect companion for:
https://makerworld.com/en/models/526647#profileId-443606
or this one: https://makerworld.com/en/models/529192#profileId-446317
To ensure that the connector is screwed in properly without damaging the threading, it is advisable to deburr thoroughly using a deburring tool.
I bought these items from AliExpress:
- PTFE Tube:
- PC4-M10:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (160)