PTFE Lid PC4-M6 – dry box / Zilo1
Print Profile(1)
Bill of Materials
Description
Caution: This model is designed for PTFE Connectors PC4-M6.
If you need a PC4-M10, you will need this model:
https://makerworld.com/en/models/719608#profileId-650438
This model allows for storing filament spools and printing without removing the spools from the airtight boxes.
This model allows stacking the boxes without being obstructed by the PC4_M6 connector.
If you need a cap for the PTF Connector, check here:
https://makerworld.com/en/models/724494#profileId-655640
The cereal box I use is this one:
The model is the perfect companion for:
https://makerworld.com/en/models/526647#profileId-443606
or this one: https://makerworld.com/en/models/529192#profileId-446317
To ensure that the connector is screwed in properly without damaging the threading, it is advisable to deburr thoroughly using a deburring tool.
Boost Me (for free)
Hit the Boost button 🚀 it's free and helps me keep designing stuff for the Bambu community.
A note on print quality: I test all my models before uploading. If your print doesn't turn out well, check your filament (old? wet?) and printer calibration first. Most issues come from these, not the model.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (35)