Made with blender with surface subdivision modifier, i enjoyed every moment of creating this and i hope you like it too!

SINGLE OR MULTICOLOR

optimized for bambu lab ams. you need 2 ams to print this full color, or use the 4 color version which has the tongue painted brown.

There is also a .3mf for PRUSA MMU, bit i have not tested it since i do not have it.

print at 0.2 and use a brim if needed. hands and body needs TREE/ORGANIC supports

i printed mine in petg. since i only have 1 ams i manually painted the shoes and gloves brown.

STLs for single color are in the raw files section

INSTRUCTIONS

• Join the body with superglue, use clamps to hide the seam better. Let dry for 15 mins
• Turn the body upside down and glue the legs, the flat part should be facing the back. Let dry for 15 mins
• Check the orientation of the arms and hands, the thumb faces up and the flat part of the arm faces back
• glue the hand to the arm and then the arm to the body… the body has little slots where the hand sits to help orientating. don't glue the hand to the body it is not needed and will look bad. Let dry for 15 mins each arm. do one at a time
• put the shoes on a flat surface orientated like the pictures and glue the whole thing to the shoes, hold upright and press down lightly by the legs for 3-4 minutes then it should support itself. Let dry for 15 mins