Deburring Tool Case


Print Profile(2)

0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
Designer
P1S, P1P, X1, X1 Carbon, X1E, A12.6 h
4.8
0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
P1S, P1P, X1, X1 Carbon, X1E, A12.8 h

177
260
62
340
246
Released
Copyright Claim
Model
Comment & Rating
Remixes
Related Models

Model

It is a deburring tool case, the spare blades can be stored in the side compartment and an additional magnetic lid prevents them from falling out. Other small parts can also be stored in the other two compartments.


The tool case has a print-in-place hinge and holds together perfectly thanks to four magnets so that the case cannot open on its own.

The deburrer is held in place by four small curves in the recess provided.


I used 6x2 magnets for the project; a total of 8 magnets are needed for the case.


The printing time is approx. 2.30 minutes.

Have fun Printing!


License

Comment & Rating (62)

0/5000

0.16mm layer, 2 walls, 15% infill

gutes Topmodell.

1
Reply
0.16mm layer, 2 walls, 15% infill

Einfach Mega. Habe es mit PETG CF auf einer Carbon Optik Platte gedruckt. Super

1
Reply
Model Comment

Top, mehr fällt mir dazu nicht ein. Ich habe es mit PETG CF auf der Carbon Optik Platte geruckt. Genial

1
Reply
0.16mm layer, 2 walls, 15% infill

fast perfekt geworden

1
Reply
0.16mm layer, 2 walls, 15% infill

Flawless print. Much needed.

1
Reply
0.16mm layer, 2 walls, 15% infill

works great! and magnets friction fit perfectly

1
Reply
0.16mm layer, 2 walls, 15% infill

I used PLA-CF for this and love the look.

1
Reply
0.16mm layer, 2 walls, 15% infill

Printed well.

1
Reply
0.16mm layer, 2 walls, 15% infill

works fine!

0
Reply
0.16mm layer, 2 walls, 15% infill

0
Reply

Remixes (0)

There are no remixes yet