Spiderman Lightbox
Copyright Claim
Spiderman Lightbox
Boost
4
6
4
Print Profile(2)
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Designer
16.1 h
1 plate
0.2mm layer, 2 walls, 15% infill
Designer
1.8 h
1 plate
Open in Bambu Studio
Boost
4
6
4
0
21
9
Released
Description
Use a 0.2mm Nozzel for the front and a 0.4mm Nozzel for the back.
Electronics:
I used a 12V LED light strip, a DC barrel connector, a 12 V power supply and some wires
The power supply and the DC barrel connector I used
https://www.amazon.de/dp/B016LV20X6?ref=ppx_yo2ov_dt_b_product_details&th=1
https://www.amazon.de/dp/B09PD6J4BN?psc=1&ref=ppx_yo2ov_dt_b_product_details
Assembly:
- Print the Front and the Back part. There are no holes in the model, just add the holes via Bambu Studio. It depends on your light strip or if you want to use a barrel connector. U can also just use a drill.
- Measure the length of the light strip and then cut it to length.
- Solder the wires and the barrel connector to the light strip
- Mount everything into the front part
- Fore the back part I used normal aluminum foil with some double sided tape to reflect the light. See pictures
- Close the box
For more details check this light box.
Comment & Rating (4)
All
Print Profile
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
tres bon
The designer has replied
0
Reply
looks great 👍
0
Reply
where did you get the file?
because i made the before under license.
The designer has replied
0
Reply
that was a picture wich I converted into an svg file. Was a lot of work to fix the generated svg.
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld